🚚 Free Worldwide Shipping on All Orders!Shop Now
Trumax Dead Center (Plain Male Point)
- Small size Taper upto MT-4 made from Bearing Steel EN-31 and through hardened to 58-60 HRc.
- Big size tapers from MT-5 upwards made from 20MnCr5 and Case Hardened to 58-60 HRc.
- Broadly confirms to IS : 2289 - 1976 (Equivalent to DIN: 806-1961 / ISO : 298)
- Precision ground.
- Tip runout within 0.015 mm w.r.t. Taper.
- Standard Point Angle 60�� (other Angles like 75�� / 90�� etc. against request)
�� Shank Taper L mm L1 mm L2 mm ��D mm D1 mm h mm h1 mm A1 mm B1 mm MT - 1 53.5 26.5 21.5 12.2 12.065 2.0 3.0 5.5 2.5 MT - 2 64.0 36.0 29.0 18.0 17.780 2.6 3.5 8.0 4.0 MT - 3 81.0 44.0 36.0 24.1 23.825 3.5 4.5 9.0 5.0 MT - 4 102.5 57.5 48.0 31.6 31.267 5.2 5.5 11.0 6.0 MT - 5 129.5 70.5 58.5 44.7 44.399 11.7 6.5 14.0 8.0 MT - 6 182.0 88.0 73.0 63.8 63.348 10.1 8.5 17.0 11.0 MT - 7 254 121 - 83.550 83.058 - - - -
Select M.T no
Select Type
From $1.09
Original: $3.11
-65%Trumax Dead Center (Plain Male Point)—
$3.11
$1.09
Description
- Small size Taper upto MT-4 made from Bearing Steel EN-31 and through hardened to 58-60 HRc.
- Big size tapers from MT-5 upwards made from 20MnCr5 and Case Hardened to 58-60 HRc.
- Broadly confirms to IS : 2289 - 1976 (Equivalent to DIN: 806-1961 / ISO : 298)
- Precision ground.
- Tip runout within 0.015 mm w.r.t. Taper.
- Standard Point Angle 60�� (other Angles like 75�� / 90�� etc. against request)
�� Shank Taper L mm L1 mm L2 mm ��D mm D1 mm h mm h1 mm A1 mm B1 mm MT - 1 53.5 26.5 21.5 12.2 12.065 2.0 3.0 5.5 2.5 MT - 2 64.0 36.0 29.0 18.0 17.780 2.6 3.5 8.0 4.0 MT - 3 81.0 44.0 36.0 24.1 23.825 3.5 4.5 9.0 5.0 MT - 4 102.5 57.5 48.0 31.6 31.267 5.2 5.5 11.0 6.0 MT - 5 129.5 70.5 58.5 44.7 44.399 11.7 6.5 14.0 8.0 MT - 6 182.0 88.0 73.0 63.8 63.348 10.1 8.5 17.0 11.0 MT - 7 254 121 - 83.550 83.058 - - - -
